Beckson Hatches

Beckson Site
Search

Beckson Star

Full Size
Completely assembled watertight hatch. The hatch cover fits into a specially designed groove to stop water from blowing in during heavy weather and rain. Designed for new installations or replacement of old hatches. There is a closed cell vinyl gasket on the cover to further ensure watertightness.
Two designs: Camber, with a deck flange designed to fit the slight curve of the deck, and Flat, for level decks.
White ABS.
Dimensions: Hole Cut 20 x 20" (51 x 51 cm) O.D. 25 x 25" (64 x 64 cm)

H-1

HP-1

HV-1

H-2

Model No.	Thru-Deck	Description	Model No.	Thru-Deck
H-1	Camber	Solid White ABS rises to 3" crown	HF-1	Flat
HP-1	Camber	Same as H-1, with clear deck plate installed	HPF1	Flat
HV-1	Camber	Same as H-1, with Vent-O-Mate® installed	HVF1	Flat
H-2	Camber	Solid White ABS with flat cover, 1 1/2" high	HF2	Flat
HP-2	Camber	Same as H-2, with clear deck plate installed	HPF2	Flat
HV-2	Camber	Same as H-2, with Vent-O-Mate® installed	HVF2	Flat

For Smaller Requirements
This watertight access hatch offers many boat owners and builders the versatility they have not before been able to enjoy. While providing a generous passage, its compact size makes it ideally suited to almost every decked boat afloat. Sturdy stainless steel adjustable tension riser, hinges, and tie downs compliment completely assembled hatch.
White ABS.
Dimensions: Hole Cut 12 1/2 x 16 1/2" (32 x 42 cm) O.D. 18 x 22" (46 x 57 cm)


HS-1	HS-2

TO INSTALL : Apply silicone caulking under flange. Screw flange to deck. NOTE: Use pan head or round head fasteners only. Hatches may be painted with an acrylic-base paint to match color.

Ventilation Hatch

IDEAL FOR INSTALLATION IN HEAD, GALLEY, MAIN OR AFT CABIN

Small Ventilation Hatch provides ventilation where installation ohatch is not permitted. Ideal for installation in head, galley, main cabin or aft cabin.

Constructed of high impact materials, U.V. and ozone inhibited. Of special note is the polycarbonate cover.

This hatch should only be installed on a flat surface using a silicone caulk. Maintain a level profile while installing to ensure proper gasket alignment. If fastening on deck crown, construct level frame base or allow caulking to fill in void area. Fasten into place using #10 round head or pan head fasteners.

Hatch is provided with a 2" spigot and trim frame.

Hole Cut: 7 3/8 x 14 3/8" (18.7 x 36.5 cm)
Overall Dimensions: 9 3/4 x 16 3/4" (24.8 x 42.5 cm)
Model No.	Description
VHBS-3	Black body, Smoke-gray cover
VHWS-3	White body, Smoke-gray cover

Stow Away Hatch

Beckson's modern storage hatch designed for multiple applications. This versatile hatch can be used for a glove compartment, engine control cover, fire extinguisher storage and many other uses, any vertical application. Incorporated into the design are some of these most sought after features:

- Modern "complete swing" hinges permit the cover to open a complete 180 degrees!
- Rugged "SLIP-CLIP" snubbing latch holds the cover firmly closed.
- Low profile exterior frame and cover reduces bulkhead clutter and clothing snags.
- Open center cover handle provides an easy finger grip to open and close the cover.
- Frame is designed to reduce distortion during installation insuring a tight closure.
- Standard hatch spigot depth is 2" (5.1 cm); can easily be cut thinner walls.
-Can be fitted with lock supplied with two keys.

Model No	Color	Hole Cut	Outside Frame
PH410MBB-20	Black body, black cover	4-1/2 x10-1/2" (11.4 x 26.7 cm)	6-3/4 x 12-3/4" (17.1 x 32.4 cm)
PH410MWC-20	White body, clear cover	4-1/2 x10-1/2" (11.4 x 26.7 cm)	6-3/4 x 12-3/4" (17.1 x 32.4 cm)
PH512MBB-20	Black body, black cover	5-1/2 x 12-1/2" (14.0 x 31.8 cm)	7-3/4 x 14-5/8" (19.7 x 37.1 cm)
PH512MWC-20	White body, clear cover	5-1/2 x 12-1/2" (14.0 x 31.8 cm	7-3/4 x 14-5/8" (19.7 x 37.1 cm)
PH414MBB-20	Black body, black cover	4-1/2 x 14-1/2" (11.4 x 36.8 cm)	6-3/4 x 16-3/4" (17.1 x 42.5 cm)
PH414MWC-20	White body, clear cover	4-1/2 x 14-1/2" (11.4 x 36.8 cm)	6-3/4 x 16-3/4" (17.1 x 42.5 cm)
PH714MBB-20	Black body, black cover	7-1/2 x 14-1/2" (19.0 x 36.8 cm)	9-3/4 x 16-3/4" (24.8 x 42.5 cm)
PH714MWC-20	White body, clear cover	7-1/2 x 14-1/2" (19.0 x 36.8 cm)	9 -3/4 x 16-3/4" (24.8 x 42.5 cm)

Hatch Hardware

	RISERS - Stainless Steel with Pre-adjustment Tension Knob Model No. ARS-1 Length: Arm, 4 1/2" (11.4cm) Track, 4 3/4" (12.1cm)
	TIE DOWN - Stainless Steel. Twist Knob pivots to adjust and fold back 90° for flush fit. Length in closed position is 2" (5.1 cm) Model No. TDS-1

Return to Home Page