Beckson Tech Tips

.... Just before installing the gasket, carefully stretch / flex it a bit - Start next to the seam holding the gasket between the thumb and forefinger of each hand, with about an inch of gasket between. Give it a little stretch. Work your way around the gasket. Be careful not to pull on the seam or over stretch.. This flexes the rubber a bit (like stretching a balloon before blowing it up) removing the stiffness. It also stretches it out temporarily just enough to make it fit better with almost no pull on the final corner.

Our thanks to Matt Jenkins for the tip

Tech Tip... Why are my ports are leaking water at the screen? Make sure the flat side of the screen is facing the lens.

If You would like to add a tip or suggestion, please pass it along and we will post it.

E-mail: webmaster@beckson.com

Return To Home Page