Siphon-Mate LogoHand Pumps


Beckson Thirsty-mate Pump

ALL PLASTIC - SELF PRIMING - SELF LUBRICATING - EASY CLEANING - WILL NOT CORRODE


Made in U.S.A.
  • Angled Top Sleeve
  • Contoured Red Tee Handle
  • Non-Conductive Material
  • Self-Priming Plunger Valve
  • Special Polyvinyl Grey Body And Shaft
  •  Removable Foot Valve For Cleaning

Check These Design Advantages
  • Self-Priming
  • Solvent welded construction
  • Will withstand temperature to 120°F (49°C)

www.thirsty-mate.com

The Beckson THIRSTY-MATE ® hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE ® hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as foot valve assemblies and hoses are readily available.

Beckson 118PH Beckson 124PF Beckson 136PF6 Beckson 224PF
118 Series 124 Series 136 Series 200 Series

Thirsty-Mate® Hand Pumps

Model#

Length

Diameter

Strokes/Gal

Capacity

Hose Length

118P

18" (45.7 CM)

1-1/4" (3.2 CM) 10 6 GM (22.7L)

None

118PF

18" (45.7 CM)

1-1/4" (3.2 CM) 10 6 GM (22.7L) 20" (51 CM)

118PH

18" (45.7 CM)

1-1/4" (3.2 CM) 10 6 GM (22.7L) 20" Tube (51CM)

124P

24" (61 CM)

1-3/4" (4.4 CM)

6 10 GPM (37.9L) None

124PF

24" (61 CM)

1-3/4" (4.4 CM) 6 10 GPM (37.9L) 24" (61 CM)

124PF6

24" (61 CM)

1-3/4" (4.4 CM) 6 10 GPM (37.9L) 72" (183 CM)

136P

36" (91 CM)

1-3/4" (4.4 CM)

4 13 GPM (49.2L) None

136PF

36" (91 CM)

1-3/4" (4.4 CM)

4 13 GPM (49.2L) 36" (91 CM)

136PF6

36" (91 CM)

1-3/4" (4.4 CM)

4 13 GPM (49.2L) 72" (183 CM)

224P

24" (61 CM)

1-1/2" (3.8 CM)

7 8 GPM (30.3L) None

224PF

24" (61 CM)

1-1/2" (3.8 CM)

7 8 GPM (30.3L) 24" (61 CM)

230PF

30" (45.7 CM)

1-1/2" (3.8 CM)

6 10 GPM (37.9L)

32" (81 CM)


Thirsty-Mate® High Capacity Super Pumps

Beckson 519C shown
Beckson 519CG#3 shown
Non-Commercial Use
Model No: 519C
Model No: 524C
Model No: 519FD
Coast Guard Approved
For Commercial Use

Model No: 519CG#2
Model No: 519CG#3
 Model# Length Diameter Strokes/Gal Capacity Inlet Hose Outlet Hose
519C 24" (61 CM) 3" (7.6 CM) 3 22 GPM 48" (1.2 M) 72" (1.8 M)
519FD 25" (63 CM) 3" (7.6 CM) 3 22 GPM 96" (2.4 M) 48" (1.2 M)
519CG#2 24" (61 CM) 3" (7.6 CM) 3 22 GPM 24" (0.6 M) 72" (1.8 M)
519CG#3 24" (61 CM) 3" (7.6 CM) 3 22 GPM 36" (1 M) 120" (3 M)
524C 33" (84 CM) 3" (7.6 CM) 2.5 30 GPM 48" (1.2 M) 72" (1.8 M)
Beckson 519FD Deck Assembly 519FD - Permanent Mount - 519FD Outlet Hose is reduced to 1 1/2" for Thru-Hull. Deck plate includes stainless steel safety chain for cover.

NOTES:  519CG#2 & 519CG#3 - Manufactured to exceed the original requirements of Coast Guard regulation No. 519C. The specifications of this regulation were later reduced when no hand pump other than Beckson's could pass the test requirements. Still "over built" to Beckson's higher standard.

Having trouble with your 519 series pump? See our trouble shooting section here. 519 Help


Canoe & Kayak Pumps

Comparison of Kayak Bilge Pumps from Kayaking.org

Beckson 318P1/FPS3R
 Model# Length Diameter Strokes/Gal Capacity
318P 18" (45.7 cm) 1-3/4" 44 CM) 8 8 GPM
318P1 18" (45.7 CM) 1-3/4' (44 CM) 8 8 GPM
318P1/FPS3R 18" (45.7 CM) 1-3/4' (44 CM) 8 8 GPM

NOTES: 318P1 is designed specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes a reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't effect a compass.

318P1/FPS3R Sea-Kayak Pump with Float-A-Pump Sleeve installed at the factory. Provides positive flotation for pumps dropped overboard.

Float Sleeve Color Options
The time will come when you drop your pump overboard.  Keep it floating with a Beckson Float Sleeve.   The sleeve is currently available in two colors, safety red and high visibility yellow.

Don't lose your pump.  Float your Pump.

Call us for details.

Pontoon Pumps

sea plane
Beckson 324FPX
Model# Length Diameter Capacity
315FPX 15" (38 cm) 1-3/4" (44 cm) 7.5 gpm
324FPX 24" (61 cm) 1-3/4" (44 cm) 10 gpm
336FPX 36" (91 cm) 1-3/4" (44 cm) 13 gpm

The float pump, designed originally for pumping out seaplane pontoons, offers the standard features of a "Thirsty-Mate®" pump with the addition of a flexible foot and tapered collar that fits standard funnels in most pontoons. The foot is threaded to accept 1 1/4" (FH 1-1/4) wire-reinforced hose for those who want to extend the reach of their pump.

Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the foot onto the pump body, providing high visibility as well as flotation.