Beckson Ventilators

Vacuum-formed white ABS air scoops with white KORAD® cap to prevent cracking or discoloring. Injection molded models C-7 and C-8 snap on and off an included deck mounted adapter and are also available in black.

For high traffic areas Beckson recommends our special Soft Cowl model SC-7 to protect bare feet.

Vent
Model Width Depth Height Adapters
Hose Size

C-1
Cowl Vent 6-1/4"
15.9 cm 7"
17.8 cm 3"
7.6 cm (A-3/VT-3)
(A-4/VT-4)
(SA-3/VT-3)

C-2
Vent 8"
20.3 cm 5-1/2"
14.0 cm 2-5/8"
6.7 cm (A-3/VT-3)
(A-4/VT-4)
(SA-3/VT-3)
(SA-4/VT-4)

C-3
Locker Vent 7-3/8"
18.7 cm 2-1/2"
6.4 cm 1-1/4"
3.1 cm N/A

C-4
Vent 5-1/2"
14.0 cm 7"
17.8 cm 1-1/2"
3.8 cm (A-3/VT-3)

C-4A
Vent 4"
10.2 cm 4-1/2"
11.4 cm 1-1/2"
3.8 cm N/A

C-5
X-Large Vent 8-1/4"
21.0 cm 9-1/2"
24.1 cm 3-1/4"
8.3 cm (A-3/VT-3)
(A-4/VT-4)
(SA-3/VT-3)
(SA-4/VT-4)

C-7 or C-7B
W/Hose Adapter 5-1/2"
14.0 cm 6"
15.2 cm 2-1/2"
6.4 cm (Included/
VT-3)

C-8 or C-8B
W/Hose Adapter 5-1/2"
14.0 cm 6"
15.2 cm 2-1/2"
6.4 cm (Included/
VT-4)

C-9
Locker Vent 9"
22.9 cm 2-1/2"
6.4 cm 1"
2.5 cm N/A

SC-7
Soft Cowl 4-1/2"
11.4 cm 4-3/4"
12.1 cm 2-1/4"
5.7 cm (A-3/VT-3)
(A-4/VT-4)
(SA-3/VT-3)
(SA-4/VT-4)

Drain Vent Model No. SV-4B
Flush vent design may be used as a floor drain or for ventilation of a speaker enclosure or locker. Color: Black
Hole Cut = 4" (10.2 cm) Dia.
Over All = 5-1/2" (14.0 cm) Dia.

Drain Vent Model No. SV-1B
Small vent for deck or bulkhead mount. Raised fins reduce clogging when used as a scupper. Perfect for venting areas under fixed seating too. Color: Black
Hole Cut = 2-1/4" (5.7 cm) Dia.
Over All = 4" (10.1 cm) x 2.5" (6.4 cm)

BETTER VENTILATION
24 HOURS - DAY AFTER DAY
NON-STOP - YEAR AFTER YEAR
Powered by just a slight breeze, the Vent-O-Mate® ventilator automatically exhausts stale, hot and moisture-laden damp air from inside a closed boat to help eliminate mildew and keep odors from accumulating - No need to wonder why your solar powered vent is not working. Wind moving over the open grill on top creates a partial vacuum that literally sucks air out of the boat - removes 350 cu. ft. of air per hour with a breeze of only 6 mph. That's enough to completely change the air in a 30' sailboat in about an hour.

Vent-O-Mate® is also ideal for adding ventilation to heads, galleys, forepeaks to help prevent mildew damage to interior wood and cabinet work. Install over anchor locker to dry wet line and keep musty odors from below. A clear shield on top permits light to enter and the vent can be closed from the inside during chilly weather to retain cabin heat.
- Draft free - Water tight - Allows light below -No obstruction below deck
Unsurpassed Exhaust Ventilator, No more dampness, mildew or condensation.

Model No. - C-6SS - Vent-O-Mate® Ventilator with stainless steel cover. We suggest C-6SS in heavy traffic areas.
Model No. - C-6 White C-6B Black - Vent-O-Mate® with plastic cover.
Dimensions: Over All -
7 3/4" (19.7cm) Dia. x 2 1/4 (5.7cm) Hole Cut - 4" (10.2cm) Dia.
REPLACEMENT COVERS -
C-6R White C-6RB Black C-6RS Stainless
Installation Instructions

MOTORIZED VENT-O-MATE® VENT
MORE VENTILATION POWER THAN SOLAR VENTS
MC-7 and MC-7SS are unavailable

Return to Home Page