Beckson Pump Component Parts and Accessories


Click on Model# to order

CA Prop 65 info
Thirsty-Mate Pump Intake Extension

Intake Extension Hoses

Designed to extend the intake reach of the 124, 136 and 300 series pumps. Use the intake hose to pump out hard to see or reach areas. Comes with bilge strainer to prevent clogging. Makes difficult pumping jobs easier.
Model# FPH-1-1/4-4= 4 ft (1.2m)
Model# FPH-1-1/4-6 = 6 ft (1.8m)
Pump Float Sleeve Float-a-Pump Flotation Sleeve
Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the foot onto the pump body, providing high visibility as well as flotation. 
Model # FPS-3R = Fits 124, 136 and 300 series pumps.
1-3/4" Rck Strainer

"Off the Boat" Rock Strainer

This gizmo replaces the existing foot on the pump. The strainer prevents little rocks from damaging the foot valve. 
Model# FVR1-3/4 = Fits 124, 136 and 300 series pumps.

Thirsty-Mate Pump Foot

Pump Foot Valve Assemblies

Pump Discharge Hoses

Pump Outlet Hose Assemblies

  • FH-1x2           20" (50.8 cm) fits 118 Series Pumps 
  • FH-1-1/4x2     24" (61 cm) fits 124, 136, 300 Series Pumps 
  • FH-1-1/4x3     36" (91 cm) fits 124, 136, 300 Series Pumps 
  • FH-1-1/4x4     48" (1.2 m) fits 124, 136, 300 Series Pumps 
  • FH-1-1/4x6     72" (1.8 m) fits 124, 136, 300 Series Pumps
Replacement Shafts

Pump Shaft Assemblies

Shaft, Tee Handle, Valves and Supports