Secure Easy Ordering 203-333-1412 www.beckson.com Secure Easy Ordering 203-333-1412 www.beckson.com HATCHES *OD: OVERALL DIMENSION STOWAWAY HATCH Providing ventilation where space may be limited, this versatile hatch can also serve as a glove compartment, a cover for engine controls, fire extinguishers, and other storage uses which have a vertical application. Incorporated into the design are features to make your boating life easier and more enjoyable: ● "Complete Swing" hinges let the cover open a full 180 degrees! ● Rugged "SLIP-CLIP" snubbing latch holds the cover firmly closed. ● Low profile frame and cover reduce bulkhead clutter and clothing snags. ● Open center cover handle provides an easy grip for opening and closing. ● Frame is designed to reduce distortion during installation for tight closure. ● Can be fitted with a lock supplied with two keys. MODEL# COLOR HOLE CUT OD PH410MBS-20 BLACK BODY, SMOKED COVER 4-1/2″ x 10-1/2″ (11.4 cm x 26.7 cm) 6-3/4″ x 12-3/4″ (17.1 cm x 32.4 cm) PH410MWC-20 WHITE BODY, CLEAR COVER PH414MBS-20 BLACK BODY, SMOKED COVER 4-1/2″ x 14-1/2″ (11.4 cm x 36.8 cm) 6-3/4″ x 16-3/4″ (17.1 cm x 42.5 cm) PH414MWC-20 WHITE BODY, CLEAR COVER PH512MBS-20 BLACK BODY, SMOKED COVER 5-1/2″ x 12-1/2″ (14.0 cm x 31.8 cm) 7-3/4″ x 14-5/8″ (19.7 cm x 37.1 cm) PH512MWC-20 WHITE BODY, CLEAR COVER PH714MBS-20 BLACK BODY, SMOKED COVER 7-1/2″ x 14-1/2″ (19.0 cm x 36.8 cm) 9-3/4″ x 16-3/4″ (24.8 cm x 42.5 cm) PH714MWC-20 WHITE BODY, CLEAR COVER Standard hatch spigot depth is 2" (5.1 cm); can be cut for thinner walls. PH714MWC-20 This Ventilation Hatch can provide ventilation where space may be limited. It's ideal for installation in the galley, main cabin, aft cabin, or head. Constructed of high impact materials, U.V. and ozone inhibited. Of special note is the polycarbonate cover. This hatch should only be installed on a flat surface using a silicone caulk. Maintain a level profile while installing to ensure proper gasket alignment. If fastening on deck crown, construct level frame base or allow caulking to fill in void area. Fasten into place using #10 round head or pan head fasteners. Hatch is provided with a 2″ spigot and trim frame. SMALL VENTILATION HATCH MODEL# COLOR HOLE CUT OD VHBS-3 BLACK BODY / SMOKE GREY COVER 7-3/8″ x 14-3/8″ (18.7 cm x 36.5 cm) 9-3/4″ x 16-3/4″ (24.8 cm x 42.5 cm) VHWS-3 WHITE BODY / SMOKE GREY COVER 32 PH512MWS-20 VHWS-3 White and black covers also available. ADD SUFFIX "L" TO MODEL# FOR LOCK.