Secure Easy Ordering 203-333-1412 www.beckson.com 212PGA HAND PUMPS UTILITY PUMPS MODEL# 216PC Length: 16″ (40.6 cm) Diameter: 1-1/2″ (3.8 cm) Pumps: 10 oz/stroke Two intake tubes: 36″ (91.4 cm) long x 1/2′ (12.7 mm) 36″ (91.4 cm) long x 1/4″ (6.4 mm) w adptr Flexible hose for water discharge: 24″ (61 cm) long x 1-1/4″ (32 mm) Red discharge tube for oil: 10″ (25 cm) long x 1-1/4″ (32 mm) ● Great for home, car, RV, garden. For routine, unusual, and emergency pumping jobs. ● Made entirely of lightweight but tough marine plastic. Will not rust or corrode. ● Non-sparking. Self-priming. Easy to use. ● Pump water from bilges, sump tanks, and from one tank to another. ● Change oil, pumping from inboard, stern drive, or engine crankcases. ● Tube provided for inserting into dipstick hole for quick, efficient pumping. ● Versatile 216PC pumps come with a kit of tubes, hoses, reducing foot, and adapter. MODEL# 212PC Length: 12-3/4″ (32.4 cm) Diameter: 1-1/2″ (38 mm) Pumps: 8 oz/stroke Two intake tubes: 22″ (56 cm) long x 1/2″ (12.7 mm) 36″ (91.4 cm) long x 1/4″ (6.4 mm) w/adptr Red discharge tube: 10″ (25 mm) long x 1-1/4″ (32 mm) 212PC 216PC CRANK CASE PUMP MODEL# 212PGA ELIMINATE THE MESS OF DIPSTICK OIL CHANGES. Beckson’s Crank Case Pump, the Handy-Mate® 212PGA is specially adapted to pump crank case oil from engines equipped with a threaded fitting on the top of the dipstick tube. ● Threaded adapter fits standard male garden hose couplers. ● Pump attaches quickly and securely. ● Self priming for almost instant pumping action. ● Made of non-sparking materials for safety. ● Large pump body and long pump stroke pumps quickly, easily, and cleanly. ● The Handy-Mate® is made entirely of tough marine plastic; will not rust or corrode. ALL PLASTIC • SELF PRIMING • SELF LUBRICATING • EASY CLEANING WILL NOT CORRODE • NON-SPARKING • VISIT WWW.THIRSTY-MATE.COM * Length: 12-3/4″ (32.4 cm) Diameter: 1-1/2″ (38 mm) Pumps: 8 oz/stroke One intake tube: 22″ (56 cm) long x 1/2″ (12.7 mm) Red discharge tube: 10″ (25 mm) long x 1-1/4″ (32 mm) 212A Length: 12-3/4″ (32.4 cm) Diameter: 1-1/2″ (38 mm) Red discharge tube: 10″ (25 cm) long x 1-1/4″ (32 mm) NEW! MODEL# 212A For use in draining traps, drain pipes, or other curved piping. Also for pumping from tanks or semi-closed places. Three feet of flexible tube fits into the foot of the pump and extends down into trap or drain. Discharge tube for directing flow into pail or bucket. NOT FOR HOT OIL SEE SAFETY INFORMATION on page 54 Also, read and follow the information on the Safety and Instruction Sheet included with your pump. ! 7 IF PUMPING SEEMS SLOW: 1) RUN ENGINE FOR A FEW MINUTES ONLY TO WARM OIL AND FACILITATE FLOW. DO NOT USE PUMP WITH HOT OIL! 2) ENSURE THE PUMP INTAKE TUBE IS NOT AGAINST THE BOTTOM OF THE OIL CONTAINER. WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov All products on this page: MODEL# 216PC, MODEL# 212A, MODEL# 212PC, MODEL# 212PGA !