Secure Easy Ordering 203-333-1412 www.beckson.com HATCHES RAISED FULL SIZE HATCHES Designed for new installations or for changing from other manufacturers' hatches, these are completely assembled and watertight. The hatch cover fits into a specially designed groove to stop water from blowing in during heavy weather and rain. There is a closed cell vinyl gasket on the cover to further ensure watertightness. Two designs: Camber, with a deck flange designed to fit the slight curve of the deck, and Flat, for level decks. White ABS coated with Korad® film for superior color retention and UV protection. HP-1 HV-1 H-2 OPEN H-2 H-1 DIMENSIONS: HOLE CUT FOR ALL: 20″x 20″ (51 X 51 cm) OVERALL DIMENSION: 25″x 25″ (64 x 64 cm) MODEL# THRU-DECK DESCRIPTION H-1 CAMBER SOLID ABS RISES TO 3″ CROWN HP-1 CAMBER SAME AS H-1, WITH CLEAR DECK PLATE INSTALLED HV-1 CAMBER SAME AS H-1, WITH VENT-O-MATE® INSTALLED H-2 CAMBER SOLID WHITE ABS WITH FLAT COVER, 1-1/2″ HIGH HP-2 CAMBER SAME AS H-2, WITH CLEAR DECK PLATE INSTALLED HV-2 CAMBER SAME AS H-2, WITH VENT-O-MATE® INSTALLED MODEL# THRU-DECK HF-1 FLAT HPF-1 FLAT HVF-1 FLAT HF-2 FLAT HPF-2 FLAT HVF-2 FLAT TIE DOWN Model# TDS-1 Stainless Steel Twist Knob pivots to adjust and fold back 90º for flush fit. Length in closed position is 2″ (5.1 cm) HATCH HARDWARE 37